This part is compatible with the below vehicles:
For Audi Q7 2006 - 2015
For Jeep Grand Cherokee All Models 2011 - 2016
For Porsche Cayenne old Models 2002-2010
For Porsche Cayenne new Models 2010-
For VW Touareg old Models 2002-2010
For VW Touareg new Models 2010-
| Fit for Porsche CAYENNE (9PA) 3.0 TDI | M 05.9D | 2009-2010 |
| Fit for Porsche CAYENNE (9PA) 3.2 | M02.2Y,PX-7 164 | 2003-2007 |
| Fit for Porsche CAYENNE (9PA) 3.2 | M02.2Y | 2003-2007 |
| Fit for Porsche CAYENNE (9PA) 3.6 | M 55.01 | 2007-2010 |
| Fit for Porsche CAYENNE (9PA) GTS 4.8 | M 48.01 | 2007-2010 |
| Fit for Porsche CAYENNE (9PA) S 4.5 | F3AE3681Y,M 48.00 | 2002-2007 |
| Fit for Porsche CAYENNE (9PA) S 4.8 | M 48.01,MX 300 | 2007-2010 |
| Fit for Porsche CAYENNE (9PA) Turbo 4.5 | M 48.50 | 2002-2007 |
| Fit for Porsche CAYENNE (9PA) Turbo S 4.5 | M 48.50S | 2004-2007 |
| Fit for Porsche CAYENNE (9PA) Turbo S 4.5 | D12C460,M 48.50T | 2006-2007 |
| Fit for Porsche CAYENNE (9PA) Turbo S 4.8 | CY4102BZLQ,M 48.51 | 2007-2010 |
| Fit for Porsche CAYENNE (9PA) Turbo S 4.8 | M 48.51 | 2008-2010 |
Description:
This air suspension valve block can direct replace the same parts in the car,no modifications are needed,making the installation simple.
It features a simple,fast and non-damage installation,the installation requires no special tools.
It is durable and long lasting,made of strong and tough material,it is anti-wear and anti-breakage.
It is perfect for some types of cars,and is a direct replacement for Mercedes Benz S Class W220 to use.
You can use it to replace the existing parts that is worn or damaged.
What is Air suspension shock ?
Air suspension shock is the system of parts that connects the frame to the wheels, thus isolating it fromthe road, allowing for relative motion. In addition to supporting the full weight of your vehicle, suspension systems affect stance, ride height, handling, and ride quality.
What happens if the Air Suspension Valve Control Unit failured?
If the Air Suspension Valve Control Unit failed, air may be leaked back to the compressor or the central air reservoir. This can cause the vehicle to not maintain the ride height required. So the failed valve block should be replaced asap.
It does not take very ling to replace this part and you can complete it by yourself !
Just follow these steps to complete the replacement:
1. Drain AIRmatic system using Diagnosis;
2. Remove compressor; Detach plug from AIRmatic pressure sensor;
3. Detach valve unit connector; Undo pressure line terminals;
4. Undo nuts (arrows) and remove level control;
5. Remove rubber buffer to level control valve;
6. Install in the reverse order; Fill AIRmatic system using Diagnosis;
7. Check AIRmatic for leaks.
